I have a regular need for removing chips in deep (2-3" deep) pockets as I machine bodies for the instrument housings I make. I did not want the trouble and expense of a FogBuster, although I am sure they are just great if you have an enclosure. I do not. So long story short, I made some aluminum pads that I could mount on either side of the column and I bought an inexpensive "Mist Coolant Lubricator" on Amazon. I machined an aluminum air manifold so I could tap into my pneumatic draw bar's air supply and the system is working really well. I can share any of the parts files to anyone who is interested. I always enjoy using my Tormach 1100. I appreciate this forums sharing of their experiences, good and bad with the rest of us. Cismontguy