Table Size:

Table size is important as it pertains to the size of the raw material and/or the number of pieces that must be cut in a certain time.

(1)If you produce furnitures or doors, you’d better choose the Professional Woodworking CNC Router Machine, gernal model size is 1300*2500mm, 1500*3000mm, 2000*3000mm and atc.

(2)If you want to make Wood, Foam, EPS Mould, you should choose the Professional Wood &Foam Molding CNC Machinery

(3) If you want use the machine to make crafts , gifts, not big piece, material is wood, pvc, plastic, glass, etc., you can choose Mini CNC Router Machine, you can produce several workpiece once time.

Spindle:

Spindle’s working mode and Power are the important for the CNC router Machine. Generally spindle is divided into two kinds. One is Water-cooling spindle, the one is Air-cooling spindle. Choose the suitable spindle, it depends on your material and your country local weather’s Max temperature.

1) If your material is soft kind, such as MDF, PVC, and you want do the smaller piece crafts, the lower power water cooling spindle , 2.2KW, 1.5KW is Ok.

2) If you want to produce the furniture or doors, engraving and cutting, we suggest you choose the Air-cooling spindles. When the material is solid wood, you’d better choose the spindle power over than 3.5KW. The cnc router independently developed by our factory is currently using Air-cooling spindles.If the material is MDF, 3.5KW, 4.5KW for you is enough.

Control System:

In China, there are three kinds control system for CNC Router Machine, DSP Control System, Nc Studio Control System, Taiwan Syntec control System. For NC Studio, there is copy version and original version, Original version ir more suitable.

Machine Guide Rail:

There are many kinds of Guide Rail in China, generally, will use the Taiwan Brand kind. For 1325 model machine, 20mm, 25mm size guide rail is enough, but forbigger size CNC Router Machine, you should choose the bigger size guide rail, such as 30mm. Big size CNC routers must adopt imported widen square rails.


This is what my BCAMCNC partner told me.