[truthfriend7]

Hi all. Please forgive me for this silly question as I've searched with no luck. Where can I get a simple sleeve to fit an 80mm 2.2kw spindle where my current 100mm 3kw spindle is mounted? Surely they make a simple sleeve for this right? I'd rather not change the mount. Thanks!

[Shesby]

Have one 3D printed. If you can't find anyone around you to do it, hit me up and I'll get you one.

Sent from my SM-G975U using Tapatalk

[mactec54]

Hi all. Please forgive me for this silly question as I've searched with no luck. Where can I get a simple sleeve to fit an 80mm 2.2kw spindle where my current 100mm 3kw spindle is mounted? Surely they make a simple sleeve for this right? I'd rather not change the mount. Thanks!

Probably not, the mounts they sell would be about the same cost, a machine shop could make you one, most likely though if you get the 80mm spindle mount the mounting holes then would be different also

So what can you do, if you can do a new set of mounting holes then just get the mount for the 80mm spindle

Do you have a photo of the one you have you may find and 80mm one that can use the same mounting holes

[truthfriend7]

Have one 3D printed. If you can't find anyone around you to do it, hit me up and I'll get you one.

Sent from my SM-G975U using Tapatalk

I'll send you a PM once I figure out how. Thanks.Im surprised there isn't something out there already.

[truthfriend7]

Have one 3D printed. If you can't find anyone around you to do it, hit me up and I'll get you one.

Sent from my SM-G975U using Tapatalk

For some reason it won't let me send you a PM. But I'd like to get a quote if you could PM me or email sethssticks which is located @gmail.com. thanks

Sent from my Redmi Note 8 Pro using Tapatalk