Hello ,
i have a problem connecting our Amada laser with Fanuc 160i-L controller with our PC.
i try to follow all settings in the manual but i'm still not able to connecting .
i use the same serial cable i use on our other machines , for example with 21i .
i suppose this should work to still.
the settings i did for now are:
0020 : 2 " RS-232C serial port 2 " (inside its connected to second connector of JD36A Board , so 2 i think? )
0101 : 0000 0001
0102 :0 " RS-232-C (control codes DC1 to DC4 used) "
0103 : 11 "Baudrate = 9600"
maybe you can help me out with this , it would help me a lot to go on ,
and maybe if someone know the pasword i need to see my ladder program in this machine it would be very helpful. i could us this to to see where the machine is stuck and why the laser keeps starting up and keeps waiting to be ready.
is this fanuc password or amada pasword?
i suppose i should be able to see the ladder to diagnose?
i can on my other machines but this one seems to be protected.
thanks a lot anyway!