Have a new 3018 Pro CNC / Engraver. GRBL 1.1 Woodpecker control board v3.4. Got fully assembled without issue installed drivers and Candle software that came with machine. Able to get Idle with startup. Able to get blue light indicating power to spindle on control board. When file is executed it completes on the screen but Spindle does not turn, jogs do not move the device. (jogs will run to infinity till they hit alarm). Tried another software same issues so pretty sure not software. Got pretty frustrated and broke down and got my husband involved (another favor ugh) we tested power to leads on spindle - nada. Removed the connection and tested the output to the cable - nada. Have not tried laser figured I had muddied the water enough at this point. Still not sure but thinking the control board is bad any thoughts from those in the know.
Reminder TOTAL NEWBIE The language is new to me. Graphic Artist/Designer