On start up, the screen displays (please open door). It does not unlock the door. This is a newly acquired 2007 L370 with P200L control. It was setup with auto door and a robot. Robot is now out of the picture.
Results 1 to 6 of 6
Threaded View
-
02-13-2021, 01:25 AM #1
Registered
- Join Date
- Apr 2008
- Posts
- 49
Okuma open door message at startup
Reply With QuoteSimilar Threads
-
OKUMA 1771 ALARM A - DOOR OPEN/CLOSE LIMIT SWITCH N.G R SİDE
By mhm42 in forum OkumaReplies: 1Last Post: 01-07-2021, 09:05 AM -
Haas OM2A Door Open Door Hold
By kaymteo in forum Haas MillsReplies: 1Last Post: 07-29-2020, 03:28 PM -
Okuma LU15 Alarm-A 1771 Door open/close limit switch NG
By MACHINATORY in forum OkumaReplies: 16Last Post: 06-12-2020, 03:18 AM -
Error Message on startup
By gunmaker in forum MilltronicsReplies: 2Last Post: 01-03-2019, 05:48 PM -
Is it possible to increase max spindle speed on an Okuma V100R with the door open?
By Icarus1967 in forum OkumaReplies: 8Last Post: 04-04-2015, 02:59 AM
Tags for this Thread
Posting Permissions
