Is there any option to have live tooling on the Tormach 15L Slant-Pro? I doubt it but if there is anyway to have this on the machine it would drastically sway my purchase decision.
Thanks,
Is there any option to have live tooling on the Tormach 15L Slant-Pro? I doubt it but if there is anyway to have this on the machine it would drastically sway my purchase decision.
Thanks,
OK...I was pretty sure it wasn't possible. I sent Tormach an email a couple weeks ago but never did get a reply from them.
Thanks,
I asked Tormach about live tooling when the SBL-15 1st came out and the answer back was "not likely". That was 5-6 years ago I think, but it seems like nothing has changed there.
I mean, technically you could install an electric or air spindle and have a relay control via usb I/O kit, but Not sure how often it would be useful without C axis orientation. Haas CL-1 appears to have implemented live tooling in this way, but it has Caxis option.
-Jon
Spindle orientation and holding it in that orientation is the big one. After that bolting a motorized tool on is probably the easy part. I've seen coolant-powered live tools for sale, although I think a serious coolant pump upgrade would be required for a Tormach.