Hello,
I was wondering if you can use a tapmatic NCR0A tapping head in a standard drill press. I don't have a user manual and there is no info on Tapmatic.com on older units.
Tap capacity is 1/4"
Max RPM 3000
I think this unit is for a cnc that has spindle speed control which I don't have. I have to tap a bunch of holes and would like to be able to use my floor standing drill press to do this.
Or do I sell this on ebay and find a manual tapping head like the 30X series.
Any info or user manual would be appreciated.
Thanks
Jim