After setting up my new sharp supermini in my garage it seems that the RUSTLICK coolant i used is going rancid already. Learning as we go here. Is 6 mounths as long as it'll last? I used an airaider like sharp suggested. Is there a recommendation for a coolant that will last longer since i don't use it daily and for now does more sitting than working?
Thread: This coolant smells
Results 1 to 2 of 2
-
08-10-2007, 06:37 PM #1
Registered
- Join Date
- Jul 2007
- Posts
- 4
This coolant smells
-
08-10-2007, 09:38 PM #2
Registered
- Join Date
- Jun 2006
- Posts
- 629
we just changed from houghton to Oemetra, and the difference is amazing. No more yellow funk on the walls of the machine, and all for a similar price. we pay $1100 CDN for a 55 gallon drum. So around $100 for the 5 gallon pail. It's been stable for us. We are using the Novamet AL
"It's only funny until some one get's hurt, and then it's just hilarious!!" Mike Patton - Faith No More Ricochet
Reply With QuoteSimilar Threads
-
Best coolant
By machinist39 in forum MetalWork DiscussionReplies: 30Last Post: 06-04-2019, 09:08 PM -
Looking for a better coolant?
By shawn in forum MetalWork DiscussionReplies: 9Last Post: 06-29-2009, 04:13 PM -
Coolant...Which and why?
By ajl6549 in forum MetalWork DiscussionReplies: 15Last Post: 12-08-2008, 03:02 PM -
Coolant or No Coolant when turning....
By Crashmaster in forum MetalWork DiscussionReplies: 3Last Post: 05-20-2007, 07:20 AM -
COOLANT (what are you using?)
By carbidecraters in forum MetalWork DiscussionReplies: 12Last Post: 01-22-2006, 07:31 AM
Posting Permissions
