Ver 33. I have a Mori mill that I use a lot of heavy tools in, and Mori made a way to choose the tool arm speed, allowing a slower change so as not to damage the arm or throw the tool.
Example: tool 1 is heavy. I go into the control registry and change the tool # to "8001". Now in my code, I use "T8001" and an M6 and it will do a slow change. Adding the "80" prefix puts the tool in the "heavy" group for the mill.
My issue is this: I can name my tool "8001" in Bobcad, that works fine. Problem is that is posts "H8001" and that is no good, it needs to be "H01" like normal.
I would like to either add the "80" prefix to all my tool numbers, or find a way to strip the "80" prefix in the H data.
I cannot figure out how to do either. Any help is appreciated!