Hello Members!
I have a problem will my moriseiki Tv-400 with MSC802(50MM). I am getting alarm M01Operation error 0106 4th axis selection during magazine zero setting.
I went through the procedure according to the manual.I havemade adjust mode M3148 to 1 then made 6440.2 to 1 select c axis but same alarm appears.
Can any one help me please?
Results 1 to 3 of 3
Threaded View
-
03-10-2021, 06:44 PM #1
Member
- Join Date
- Dec 2020
- Posts
- 8
MORI SEIKI TV400 Magazinezero point adjustment problem
Reply With QuoteSimilar Threads
-
Mori Seiki CL203 - problem with turret zero point
By dornbush in forum Mori Seiki lathesReplies: 6Last Post: 02-02-2024, 02:57 PM -
Which Parameter to set for Programming without Point Mori Seiki CL-200B with MSC-803
By MSP-Service in forum SERVICE FOR CNC-MACHINESReplies: 1Last Post: 01-14-2021, 10:58 AM -
Mori Seiki NL2000/500 lost zero point
By zotya54 in forum Mori Seiki lathesReplies: 1Last Post: 12-17-2015, 04:03 PM -
Mori seiki CL203B MSX-803III. not able to figure out how to set ABS Point
By zoik4you in forum Mori Seiki lathesReplies: 0Last Post: 10-20-2015, 04:08 AM
Tags for this Thread
Posting Permissions
