Re: Help Required!
Hi Dean,
(take a look at the manuals that I've linked in my post)
the easiest way is to print a couple of pages from the manuals and place it side by side
Current settings - SloSyn: Page 4-4; Leadshine: Page 8
Microstepping - SloSyn: Page 4-5; Leadshine: Page 7.
As per the electrical connections equivalents are:
OPTO - PUL+ and DIR+
PULSE - PUL-
DIR - DIR-
Only difference is that one jumper wire is needed to interconnect PUL+ and DIR+ on Leadshine driver(s).
If microstepping can be set as on the SloSyn driver, no software adjustments are needed.
As can be seen from Gadge's pictures AWO and RDCE are not connected.
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.