I have a lathe with a fanuc Oi-TC controller, machine was purchased used and originally communicated with rs232
i have purchased a pcmcia to cf card adapter, cf card 128mb transend industrial CF220i
the controller can see the files on the card
i have been able to delete files on the card from the controller
i have formatted the card using the controller
i/o para is set to 4 (memory card)
process i am trying with no great success is below
>system>all i/o>card>oprt>Nread>fset(O1997.txt)>Oset (1997)>EXEC
i get a breif flash of lsk and input but no other msgs and the file isn't in my controller directory, getting stuck and playing around i also tried Fread
machine is in edit mode, key is in edit position (tried both positions)
Any suggestions here would be much appreciated