A couple o questions Andy,
What are these holes for, or are they important in the part z_bottom, and what size cutting do you use to cut out these parts or you do a tool change?
A couple o questions Andy,
What are these holes for, or are they important in the part z_bottom, and what size cutting do you use to cut out these parts or you do a tool change?
Hi Tajord -
Sorry for the delay in replying. Those holes were intended for washers. One issue I was concerned about was the edge of the aluminum angle sinking into the wood if torqued in too much. I figured putting metal washers in there would prevent that from happening. It hasn't really been an issue on the MDF parts, so I phased it out in my latest changes.
Andy
CNC Kits - http://www.comptonsoft.com/cncweb/
hey thanks for the reply, a well thought of idea i must say though, i can see how it would help too, who knows, maybe i will use it, you know, kinda like a little insurance.
Hi Lionclaw, everybody,
having built a basic CNC router from scratch, I'm preparing to build a bigger one, preferably something that can handle 2'x4' cutting area or bigger. I was planning on just making my own again, but lately I've been tempted by some of the kits out there- I've been looking at the Joe 2006, the buildyourownCNC.com model and the LionClaw LC50B.
I'm posting this here because I haven't seen much of lionclaw here recently and was wondering if he's still doing kits. Is the price on the website current, and what's the estimated turnaround?
Sure, I could PM him, but that's no fun for everybody, is it?
Cheers, Jim
Hi Jim
I'm still doing kits. I'll be away however until mid february for some training in alabama. I've got the stock set to 0 for most items on the site to prevent orders until I return. The prices on the site are current, and the turnaround is usually about a week from when the order is placed.
Andy
Andy
CNC Kits - http://www.comptonsoft.com/cncweb/
Andy, glad to see you on.
Hope your training goes good, and maybe you get to stay in the states.
hows the projector, any time to use it now. pm me sometime when ya get a chance.
Joe
You know, I'd swear I replied to Lionclaw last month....
Anyhoo, awesome. I want to build the LC50B, so I'll just wait until he's back from Abalama.
Cheers! Jim
After seeing a youtube video of this lionclaw, wow!
When does the web site come back on line for me to possibly order me a kit?