Hello.
I have a Planet CNC MK3/4 Controller board in combination with an JP-3163B Board.
My Problem is, that I am getting 10V output at S0 (0RPM) Spindle speed and 0V output at S120000 (100%) Sindle Speed.
I tried to check the box to invert output 2 (which is my PWM signal) but that makes no difference.
Is there any way to work this in software or do I have to make a hardware fix?
*I am using the old design Planet CNC Software.
Results 1 to 3 of 3
Threaded View
-
04-23-2021, 09:58 PM #1
Member
- Join Date
- Apr 2021
- Posts
- 2
Invert PWM on genuine Planet CNC MK3/3 Board
Reply With QuoteSimilar Threads
-
Connecting spindle (PWM) output to mini lathe, MK3/4 board
By promo in forum PlanetCNCReplies: 5Last Post: 08-14-2019, 03:32 PM -
Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help
By bstonterrier in forum Laser Control SoftwareReplies: 3Last Post: 04-09-2019, 06:17 PM -
Experience with rotary tool changer on planet-cnc MK3
By hoizlaender in forum PlanetCNCReplies: 3Last Post: 01-03-2019, 08:45 PM -
Planet CNC Mk3/4 Output count expansion
By lh-cnc in forum PlanetCNCReplies: 3Last Post: 01-03-2019, 11:25 AM -
Connecting a spindle motor to mk3/4 board and controlling via planet software
By Ravihotwok in forum PlanetCNCReplies: 2Last Post: 09-12-2017, 12:29 PM
Tags for this Thread
Posting Permissions
