[suli25an]

Dear Sir:.
I have a problem with a program TNGv2, when I open the file (settings), it shuts down the entire program, turns off ,Please can you help

[mar_cone]

PC motherboard is Asus?
if so, disable the usb ports one by one until you find the one that conflicts with MK3 / TNG. it happened to me too, I "solved" by disabling the USB ports on the front of the case

[suli25an]

Thank you very much for your interest.
I have an Asus motherboard(Maximus XII Hero WI-FI).
I worked the same steps disable the usb ports one by one.Not changed, the same problem.

- - - Updated - - -

PC motherboard is Asus?
if so, disable the usb ports one by one until you find the one that conflicts with MK3 / TNG. it happened to me too, I "solved" by disabling the USB ports on the front of the case

Thank you very much for your interest.
I have an Asus motherboard(Maximus XII Hero WI-FI).
I worked the same steps disable the usb ports one by one.Not changed, the same problem.

[mar_cone]

I'm sorry you didn't solve it. I reported an experience of mine in the hope it would be useful to you.

[PlanetCNC]

Does "Help/Show Log" work?
What about "File/Export Profile"?

[suli25an]

Yes, it does "Help/Show log" work.
Yes it exists "file/Export Profile", but it does not work