Hey guys,
Huge fan, and long time lurker. I have read through nearly all @BrianBoneDoc and @PCW_MESA posts before attempting this, and that is why I have been able to get this far problem free. Much appreciated guys.
However, in PathPilot The Rev and Fwd buttons do nothing for the spindle, nor the RPMS.
The EP1C Servo Controller in the back of the Novakon says ERR 13, which their documentation in the manual is hardly helpful as it lists 6 different vague issues it could be.
Has anyone still around put PP on their Pulsar and been successful, or use a EP1C servo with a MESA card?
Thanks!