Hi all,

Has anybody successfully wired more than 4x axes to a cncdrive AXBB-E?
Ive got the first 4x axes (X,Y,Z,A) working perfectly off the non-isolated side of port 1 (pins 09-16) but am having trouble with expansion of B and C axes on the isolated side using pins 5,6,7 and 8.
I'm using Mach3 and have configured DIR/step pins correctly but feel it's a wiring issue rather than a software one.

A wiring diagram, photo or any advice would be greatly appreciated!
Even if you're using UCCNC, I'd love to see your wiring setups.

Thanks!