Hi Guys,Tried to take a 4th axis simultaneous cut, get a 5011 error.Changed parameter 1432 from 0 to 3000, program ran fine. Tried to run a roughing cut that had g5.1, program errored back out.Checked parameter 1432, it was set back to 0.Removed g5.1 from my program, set 1432 to 3000, program ran fine, and stayed at 3000.Can you think of a reason g5.1 would be setting this to 0?
Results 1 to 1 of 1
-
02-02-2024, 05:51 PM #1
Junior Member
- Join Date
- Aug 2016
- Posts
- 19
DNM 650- G5.1 is overwriting my 1432 parameter, causing a 5011 PARAMETER ZERO error
Reply With QuoteSimilar Threads
-
need manual cnc lathe Parameter and electric wire colchester universal 650.6T-B.
By Yudicai in forum FanucReplies: 0Last Post: 04-10-2022, 01:47 AM -
need manual cnc lathe Parameter and electric wire colchester universal 650.6T-B.
By Yudicai in forum Machinery Manuals / BrochuresReplies: 0Last Post: 04-07-2022, 10:34 PM -
need Manual book cnc lathe Parameter . electric wire colchester universal 650.6T - B.
By Yudicai in forum Colchester Tornado lathesReplies: 0Last Post: 04-07-2022, 02:17 PM -
Parameter for Fanuc 18M control for Makino 650 VMC
By venuengg in forum Uncategorised CAM DiscussionReplies: 0Last Post: 03-13-2019, 01:07 PM -
Doosan DNM 540 parameter change
By mousongie in forum Daewoo/DoosanReplies: 1Last Post: 08-27-2015, 02:36 AM
Tags for this Thread
Posting Permissions
