Hi All
Has anyone here any experience of using a JMC iHSV57-30-18-36-21-38 servo motor in a Z axis (with a 2.2kw standard chinese spindle motor) without a brake on the servo. Does the axis drop the motor when powered down (using a ball screw)?
Cheers in advance
Andrew
Results 1 to 3 of 3
Threaded View
-
05-23-2021, 09:42 AM #1
Registered
- Join Date
- Oct 2007
- Posts
- 23
JMC iHSV57-30-18-36-21-38 servo for Z axis without brake does it work?
Reply With QuoteSimilar Threads
-
Z axis servo brake failure
By srcarr52 in forum MilltronicsReplies: 1Last Post: 10-13-2020, 07:27 PM -
What is the catch with those JMC servo IHSV60-30-40-48
By HuguesP in forum Servo Motors / DrivesReplies: 30Last Post: 12-23-2019, 02:49 AM -
Jmc servo motor 180w Ihsv57 , some video details
By nekitamo in forum Servo Motors / DrivesReplies: 1Last Post: 08-19-2019, 10:12 AM -
EASY SERVO (close loop step servo) - JMC electromechanics
By claudia in forum News AnnouncementsReplies: 0Last Post: 04-09-2019, 11:16 AM -
Nema 23 IHSV57 Integrated Servo motor
By snakepit in forum European Club HouseReplies: 0Last Post: 05-12-2018, 11:11 AM
Tags for this Thread
Posting Permissions
