586,052 active members*
4,253 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Spindles / VFD > Wiring and programming

Thread: Wiring and programming

Results 1 to 5 of 5
  1. 03-02-2022, 01:05 PM #1
    Diae
    Diae is offline
    Join Date
    Feb 2022
    Posts
    59

    Wiring and programming

    Hi everyone
    I have a vfd ( KEB F5)
    i have some wiring on it i don't know what type of control (pic in attachmnts)
    Now i would wire it with an nc studio controller board (pic in attachmnts) the board is jut an extension of db 15

    Can any one help
    Attached Thumbnails Attached Thumbnails Screenshot_20220302-125916_Samsung Internet.jpg   20220302_115009.jpg  
    Reply With Quote Reply With Quote
  2. 03-02-2022, 03:05 PM #2
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: Wiring and programming

    Quote Originally Posted by Diae View Post
    Hi everyone
    I have a vfd ( KEB F5)
    i have some wiring on it i don't know what type of control (pic in attachmnts)
    Now i would wire it with an nc studio controller board (pic in attachmnts) the board is jut an extension of db 15

    Can any one help
    Do you have the manual for the VFD Drive, that Breakout board may not be suitable?
    Mactec54
    Reply With Quote Reply With Quote
  3. 03-02-2022, 03:08 PM #3
    Diae
    Diae is offline
    Join Date
    Feb 2022
    Posts
    59
    Quote Originally Posted by mactec54 View Post
    Do you have the manual for the VFD Drive, that Breakout board may not be suitable?
    Yes i have it
    That what i think
    Have you look at the manual?
    Reply With Quote Reply With Quote
  4. 03-02-2022, 04:38 PM #4
    dazp1976
    dazp1976 is offline Registered
    Join Date
    Jan 2018
    Posts
    1516
    Quote Originally Posted by Diae View Post
    Yes i have it
    That what i think
    Have you look at the manual?
    That little board is for axis I/O from some kind of controller with db15 connection.
    Or for pc db25 to db15 converter for a simple lathe machine etc.
    Not for signals on a vfd.
    Reply With Quote Reply With Quote
  5. 03-02-2022, 11:46 PM #5
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: Wiring and programming

    Quote Originally Posted by Diae View Post
    Yes i have it
    That what i think
    Have you look at the manual?
    No, I don't have this model manual can you do a PDF File and post it here
    Mactec54
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. CNC 6040 - "Nowforever" VFD Programming / Wiring
    By shock-cnc in forum Chinese Machines
    Replies: 24
    Last Post: 02-11-2017, 05:05 AM
  2. wiring check please. parallel wiring to maximum current to servo motors
    By Novett in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 10-11-2014, 07:54 PM
  3. Another sPID, G540, and Mach wiring question for the wiring challenged..
    By adam_m in forum DIY CNC Router Table Machines
    Replies: 17
    Last Post: 01-02-2014, 01:29 AM
  4. Xilog 3 Parametric Programming Offline Programming
    By julioykaly in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 04-27-2013, 09:22 PM
  5. instruction parameter programming / macro programming
    By kickinger in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 08-31-2011, 10:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules