I bought an Avid Pro4848 and have the mechanical part pretty much done. (well done machine design for end user assembly.) I am putting together the electronics to control it myself.

I did buy the Pepperl-Fuchs limit sensor package. (I could have gone with cheaper Chinese knockoffs and will probably test with some) One thing that has been hard to determine is what connectors the limit sensor pre-made cables plug into. In particular I want to buy the receptacles to mount on the electronics enclosure. PF says the connector is M12 but there is a bewildering array of M12 4-pin connectors with different forms including alignment slots in different places. Datasheet for one of the sensors.

Can someone who has been down this road help me? Are "Aviation style" GX12s the same? Do you have specific part numbers that you know work?

Worst case, I cut the end off and put some other connector on it.

The sensor itself
Attachment 464608

Cable end that connects to the sensor
Attachment 464610

Cable end that connects to electronics box. Need the receptacle that this plugs into.
Attachment 464612