Good day.
Have a new milling machine with a "Weihong NK300CX" controller, dont have the password.
Any suggestions?
Also need to change the soft limits once have access.
Regards
Thread: Weihong NC300 controller
Results 1 to 3 of 3
Threaded View
-
07-04-2021, 09:50 AM #1
- Join Date
- Jul 2021
- Posts
- 2
Weihong NC300 controller
Reply With QuoteSimilar Threads
-
Technical support for WEIHONG CNC Controller, NCstudio,NK260
By jason-weihong in forum Commercial CNC Wood RoutersReplies: 6Last Post: 08-24-2022, 04:10 PM -
Weihong ncstudio CNC controller card Driver help!
By xchiazyx in forum Commercial CNC Wood RoutersReplies: 0Last Post: 10-04-2016, 02:41 PM -
Conversion from Weihong NK105G2 DSP Controller to GeckoG540 and Mach 3 on 4 axis rout
By cnc170 in forum Gecko DrivesReplies: 0Last Post: 11-24-2014, 01:24 AM -
Weihong NK105G@ DSP Controller
By cnc170 in forum Australia, New Zealand Club HouseReplies: 0Last Post: 11-07-2014, 07:01 AM
Tags for this Thread
Posting Permissions
