We recently purchased a MC-50VA machining center that has not run in several years. I know that I have an issue with the VAC 3 spindle drive because no power light comes on the drive when I power up. The controller (OSP5020M) loads files from memory and then come up with an error 82 VAC start 1001FFFF. It then halts with the controller saying "SBP monitor". (See attached picture of monitor and error codes) My question is will this error prevent the controller from starting up or do I have other problems that I am not aware of?
Thanks in advance for any help or ideas.
Results 1 to 4 of 4
Threaded View
-
07-13-2021, 02:28 AM #1
Member
- Join Date
- Jun 2010
- Posts
- 16
OSP5020M Controller Stalling on Boot Up
Reply With Quote
Posting Permissions
