Hello everyone,
I have 50W CO2 Laser Engraving Cutting Machine Engraver Cutter (from China)
The software I use is thunder Laser
The controller I have is ruida.
I have had this laser for less than a year and suddenly X motor doesn't work as it should.
I have tried to check the setting in vendor but it made no difference (I have 3 more lasers like this so I copied the vendor settings and paste it in this laser machine but it still didn't made any difference) also I have replaced the X motor thinking that it's broken but after I put new motor it had the same problem.
I have replaced X micro-step drive and mainboard with the new one but it made no difference.
I change the pc thinking that it might cause the problem but nope :I
I tried to look for the dirt in X motor path or belt thinking that maybe this is the problem but I couldn't find anything.
the belt is not loose either so I have no idea what it could be.
can anyone help me with this problem?
Pov'