Greetings Everyone.

I am hoping someone could provide me with a little insight. I have been searching around for some answers with little success.

We have a FANUC EDM machine that recently ran into some issues. It was receiving a boot error. I looked into the machine and noticed the main unit fan has seized up and no longer functioning. Our milwright took the unit apart and we have since added some temporary fans into the unit since the 90MM 24VDC were hard to come by. I have them on order.

He is looking at replacing the battery.

Attached is a screen shot of the error, any advice or information to point me in the right direction would be greatly appreciated.