Hi,
We have an early model Mini Mill(2001). The machine will boot up and run, but in the middle of a cycle will shut down immediately without any alarm. It seems to happen when the machine is running a cycle. If it is on,but idle it doesn't shut down. Incoming voltage is 208. Thanks for any help!
Results 1 to 4 of 4
Threaded View
-
09-08-2021, 03:11 AM #1
Registered
- Join Date
- Aug 2008
- Posts
- 28
Haas MiniMill shuts down without alarm
Reply With QuoteSimilar Threads
-
AL-12 spindle servo alarm Fanuc OM shuts down when it comes to clearance /M5/M9
By kirby in forum FanucReplies: 1Last Post: 01-08-2019, 01:43 PM -
alarm 966 on new Haas Minimill
By nelZ in forum Haas MillsReplies: 3Last Post: 10-30-2016, 05:24 AM -
MiniMill(Haas)
By smallplanes in forum Haas MillsReplies: 4Last Post: 11-16-2011, 07:54 PM -
Haas minimill, what should I know...
By Freddy Bastard in forum Haas MillsReplies: 14Last Post: 07-06-2009, 08:23 AM -
HAAS machine – controller shuts down
By Markus_Oh in forum CNC (Mill / Lathe) Control Software (NC)Replies: 6Last Post: 08-28-2008, 08:06 PM
Tags for this Thread
Posting Permissions
