Does anyone have experience with these:
https://www.omc-stepperonline.com/download/iSV57T.pdf
180W (the large one)
Nema23
16 bit encoder
3000rpm nominal, 4000 max
Peak torque 1,8Nm
Tuning software available
Differential step/dir
Does anyone have experience with these:
https://www.omc-stepperonline.com/download/iSV57T.pdf
180W (the large one)
Nema23
16 bit encoder
3000rpm nominal, 4000 max
Peak torque 1,8Nm
Tuning software available
Differential step/dir
No experience, but I saw this video the other day. Seems like a decent overview of holding torque and tuning. Sorry for the double post, not sure how to delete the first one.
https://youtu.be/clgpZJFoqIQ
Great thank you.
I did see the video where he testet steppers also. Good stuff.
I guess the stiffness shouldn't matter too much when coupled to a ball screw - at least it should be possible to calculate how much deviation it would have.
Also I think maybe with proper tuning it should behave differently. But that might not be easy to do without proper instructions.