Quote Originally Posted by deadlykitten View Post
hy broby on lathes, this syntaxes are equivalent : V1 = 123, VC[1] = 123 , VC [0001] = 123, so try VC [ VC [ 1 ] ]
Actually Mr Kitty, you are incorrect, V1..V200 is available on the Lathe and VC1..VC200 is available on the Mills

The desire, and in truth, the requirement is to NOT use an external file as apprentices and others, not so knowledgeable, are to use this program... should I get it working to the desired level of usability.

As for supplying further operational requirements for the program, nope, not happening.

Brian.