Hello guys,
I have a milling machine with controller Fanuc 0i-F.
I'm trying to make a thread but when is reversing out the feed is faster and speed is same and my thread is not good.
My progrram:
M00
S100M3
G0G90G54X0.0Y0.0M8
G43Z50H4M8
S100M29
G84G98Z-42.0R2F150
Y-15.
Y-25.
Y-35.
G80

The feed is 150 and for reversing is changing to 225.
I want the feed to be same.

Any help would be really appreciated.