Hey guys,

I have 3 work offsets, all tools are set off of G54 Z zero plane (top of complete part) but when I measured the distance between the top of G54 to G55 & G56 (same height) only one of my tools was at the right height for G55 and G56. All other tools were above G55/56 by 10.81mm, I made sure there was a G43 in each tool call up so the correct height is being called for. I can't seem to see why all of my tools are above my other parts, I am creating a waterfall from one vise to the next. G55 and G56 are right next to each other in their own soft jaws and are the same height. My offset for G55/56 is -10.81mm so that is why this is so odd. Tool 1 is the only tool that is working between the two correctly tho but the other 8 are not. I am using Fusion 360 but I don't believe this to be a CAM problem, G code is correct on screen.