Hi all, first post here.

I am having the hardest time finding a solution for controlling the spindle on my Little Machine Shop 6500 (Sieg 2.7) that I am converting to CNC. LMS offers controllers for every other machine but not the 6500/2.7 series. I’d rather not replace the spindle as the machine is new and the 1hp should do ok for a bit anyway.

I’ve read a few posts where people have similar issues, but no real solutions.

Did I just buy the wrong mill? I went for the 2.7 because I wanted to add the priest power drawbar to it and liked the beefier construction.

Thanks in advance for any ideas