XY Datum or machine home question...
I have a model that I need to start in a position other than machine home, mainly due to 2 sided carving.
I've located 3 pins in the material that I need to use for 0,0 on the model but I'm not exactly sure what I should be setting in Aspire. Is it the Home / Start Position that I should be using or am I using the Offset in the Material setup, hopefully this makes sense.
My 1st pin is (.5, 2.25) from machine home.
Gecko G540, Rack and Pinion Drives-X and A axis, 1/2-10 5 Start Acme-Z Axis
4-THK HSR 25 Linear Slides, KL23H2100-35-4B, Power Supply-KL-600-48 48V