Hi Everyone, I have decided to try build my own CNC. What I am looking for is to build a fair strong platform that works with wood mainly and aluminum sometimes. I found a really nice design on internet (I lost link to owner but all credit goes to him), and I started modifying his design to better idea until reached initial design as per photos.
Items planning to use:
- 2.2kw water cooled spindle
- NEMA 34 stepper (4.0N.m / 3.6mH) for all axis
- SFU1605 ball screw for all axis
- HGR20 linear guide rail for X and Y axis
- HGR15 linear guide rail for Z axis
Workable Area (so far):
Y > 790 mm
X > 648 mm
Z > 125 mm
Looking forward for your feedback and idea. thank you in advance.