Hello,

I am clearly a newbie/hobyist in the word of the cnc. I have a Workbee 1500mm x 1500mm from ooznest at home since about a year for my woodworking stuffs.
But now, I also would like to make wood jewelry and toysand those kind of projects: https://bewood.pl/en/wooden-map---ma...RoCum8QAvD_BwE but of course it is never possible to make the internal corners sharp and the details small enough with a router mounted on it. So I would like to adapt a laser module. It will be mainly to cut some thin plywood or mdf (3-6mm).

So I have two questions:
- What kind of laser should I take? I saw multiple videos on youtube with some guys that looks pretty happy with the ortur machines. and the pricing 100-150€ looks attractive and in my budget https://ortur.net/collections/option...aufero-laser-1 . Some people also advice to use a CO2 laser but if I understand correctly it is quite fragile so that could be an issue. Also, still realted to this question, what about the security because I will not do a big protection box as my cnc is quite large.
- Second question, how do I connect this laser to my duet controller? I didn't have a master in electronic but I didn't have 90€ to spend in an additional controller link in this kit either https://optlasers.com/cnc-laser-upgr...-xf-laser-head

Also as I have an air compressor it could be good to buy a compressed spot stuff but is is something that I really need to buy to have good result or do I have some alternative to build something similar in diy?

REgards,