Re: control rotating indexing table with 3PH motor
Originally Posted by
Syphonics
Hi all, how do i control stop and go function of the rotating indexing cam table that includes the 3PH motor with brake with VFD.
Can I program the motor to brake once it reach the position without stopping the frequency speed of motor.
Will this cause the motor or VFD to heats up?
This will damage the motor or VFD
Or should I brake and stop the VFD upon position, and release brake and start VFD to move to next position.
But this method will have a slow start up..
Thanks
This is the proper way to do it. You can most likely set the acceleration to 0.1 second, almost instantaneous.
The better method would be to control the rotary with a servo motor rather than a 3 phase motor and a VFD.
Jim Dawson
Sandy, Oregon, USA