hi everyone.
i have a 10*5 cnc router with a 4.5kw spindle , non atc.
i have purchased a hqd 6,5 kw atc spindle and vfd, i am running uccnc with an uc300eth-5lpt controller and a ucbb bob which i upgraded to from a chinese controller and mach3 , apart from the spindle and vfd what other items are needed for the air side of things ,i have a 300 litre compressor also what solenoids are needed ,anyone have any step by step guides of there own setup to atc or know of any good videos available so i can get my head around it.im not using the router at the minute due to other commtments so i have loads of time to get it sorted.
thanks voyager1972.