My 1 week only avid cnc benchtop pro 3x2 with nema 34 motors has developed a strange issue where seemingly randomly one or more of the axis will lock up like in a crash. It has happened while manually jogging the machine, while the machine is running a program, and while the machine is going to a offset location like the MTC location or the work offset zero. Once it happened during a program, and i was slow to hit the estop so i noticed that after about a second of being "crashed" the machine kept working as normal but had lost a significant amount of steps. So far I've mechanically checked both x and y axis and found no signs of anything that could cause an issue like this. My wireing generally seems pretty neat, but all the slack is birds nested in a heap under the table the router is on. I havent run the windows settings optimizer thing avid recommends since i use my "cnc control computer" (laptop) as my main work computer too.
Wondering if anyone has thoughts about what this could be. Thanks for reading!