Hello everyone, I´ve been gathering all the elements I need to build a diy 4´x8´ cnc router.
so far this is what I got: 500, 1500, 2500mm hgr20s, (2 on the ¨Y¨axis), sfu2005 which are my biggest concern because started watching at this forum the recommendations of getting 10mm pitch on ballscrews. I have nema34s 4.5 Nm, and planning to get a 3.5kw air cooled spindle (8kg of weight). If somebody could give an orientation on where am I at right now to get the most optimal out of what i have, or any recommendations on changing something would be very appreciated. Also need advice on what size of aluminum extruded is needed for a good estructure. thanks a lot and got bless you¡