I'm new to machining and just saved enough for the TAIG 5019 CNC Micro Mill (With Ballscrews).
The parts I am buying the machine to make need some turning and some milling so I am going to attempt to mill turn with my TAIG mill.
I haven't seen much online about this but am I able to attach a lathe chuck directly to my Mill Spindle? The parts I need to turn are 80MM in diameter/ Hard wood. Also some smaller pieces of SS.
Here is the chuck I found that seems like this might work with.
https://www.sherline.com/product/3-1...t-chuck-er-16/
Will this work or do I need some kind of adapter?
Thank you guys so much for any and all help.
Myles