Hi all,
Could some one help me out I am trying to cut external thread NPT 3/8 -18 on my lathe OSP700L control, no clue first time doing it.any help will be appreciated
Thread: Help with npt 3/8-18
Results 1 to 4 of 4
Threaded View
-
12-15-2021, 04:58 PM #1
Registered
- Join Date
- Oct 2016
- Posts
- 2
Help with npt 3/8-18
Reply With QuoteSimilar Threads
-
NPT Help.
By Stifler51 in forum Haas LathesReplies: 0Last Post: 11-05-2010, 01:15 AM -
NPT Taper-to-Straight-to-NPT-Taper Thread
By bdyenter in forum MetalWork DiscussionReplies: 2Last Post: 09-16-2009, 02:10 PM -
3/8 NPT
By Randy727 in forum SolidworksReplies: 2Last Post: 07-07-2009, 06:24 PM -
1.25-11.5 I.D. npt
By tap32 in forum MetalWork DiscussionReplies: 2Last Post: 11-07-2008, 10:24 PM -
1/4-18 npt
By fukeneh in forum MetalWork DiscussionReplies: 1Last Post: 04-13-2007, 07:01 PM
Tags for this Thread
Posting Permissions
