I just got a 4" Tormach vise for my recently acquired used 440 and found to my dismay there were no alignment keys, do I have to make them or?
Thread: 440 vise alignment key?
Results 1 to 5 of 5
Threaded View
-
12-26-2021, 03:12 PM #1
Registered
- Join Date
- Jul 2009
- Posts
- 15
440 vise alignment key?
Reply With QuoteSimilar Threads
-
Pressing one key on a Haas keyboard also generates the adjacent key
By fomaz in forum Haas LathesReplies: 0Last Post: 12-22-2021, 08:35 PM -
VH-5C Alignment Key removal
By rwskinner in forum FadalReplies: 4Last Post: 10-01-2019, 10:16 PM -
Can't get a straight answer on this vise. TTC Super Precision Toolmakers Vise
By l u k e in forum Work Fixtures / Hold-Down SolutionsReplies: 2Last Post: 05-03-2016, 06:13 PM -
Oval part alignment in vise jaws
By jlembas in forum Work Fixtures / Hold-Down SolutionsReplies: 7Last Post: 12-26-2010, 04:56 PM -
GB alignment key sheared off!
By PoiToi in forum CNC Swiss Screw MachinesReplies: 4Last Post: 08-03-2010, 02:37 PM
Tags for this Thread
Posting Permissions
