586,103 active members*
3,701 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Engraving / Cutting Machine General Topics > HELP With Red Chinese Laser (TL-410C Top Wisdom) Stalling and Noise at Full Speed

Thread: HELP With Red Chinese Laser (TL-410C Top Wisdom) Stalling and Noise at Full Speed

Results 1 to 2 of 2
  1. 02-01-2022, 11:09 PM #1
    Mylezman
    Mylezman is offline Member
    Join Date
    Feb 2022
    Posts
    2

    HELP With Red Chinese Laser (TL-410C Top Wisdom) Stalling and Noise at Full Speed

    I am requesting some Help or advice with my Red Chinese Laser (TL-410C Top Wisdom 900mmx600mm). When the laser head moves vertically at full speed (800mm/s) it stalled and makes a loud noise. Note: It does NOT stall or make noise at any speed less than 800mm/s. I can show more settings if necessary. Thanks!

    https://www.youtube.com/watch?v=k6-RXZ-YCgk
    Reply With Quote Reply With Quote
  2. 02-02-2022, 12:20 AM #2
    ZASto
    ZASto is offline Registered
    Send a message via ICQ to ZASto
    Join Date
    Apr 2005
    Posts
    304

    Re: HELP With Red Chinese Laser (TL-410C Top Wisdom) Stalling and Noise at Full Speed

    On that type of laser machines, Y axis can not travel as fast as X axis.
    It's too heavy.
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules