Alright guys im pulling my hair out here can anyone tell me why i would be getting this G41/G42 interference alarm? i get the alarm right as it reads the G43 line what am i missing here my apologies if my frustration is causing me to overlook the issue! I have also attached a snapshot of the controller screen!
T11M06
G05.1 Q1
(Macro 'Z_PRECISION_ROBO_5' Selected.)
M31L5(SPEED QUALITY)
M100
N9(**** 3+2 Transition End Block ****)
S15000M03
M72
M69
(RHS FORM - OUT : Operation 9 of 12)
G00G90G54.1 P2B-55.0C-90.0
N9(**** TWP Enable ****)
G68.2 X0.0 Y0.0 Z0.0 I.0 J-55.0 K-90.0
G53.1
X3.3426Y3.6758
M71
M68
M09
N9(*** Transition Z Axis Next ***)
N201
G90G10L11P11R#670
G90G10L13P11R#671
G43Z2.6464H11
N9(**** 3+2 Transition End Block ****)
G00
Z2.3198
G01Z2.3148F25.0