586,075 active members*
4,114 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Master cam swarf 4axis finishing inconsistency

Thread: Master cam swarf 4axis finishing inconsistency

Results 1 to 6 of 6

Threaded View

  1. 03-08-2022, 09:07 PM #1
    Ragyw
    Ragyw is offline
    Join Date
    Mar 2022
    Posts
    1

    Master cam swarf 4axis finishing inconsistency

    I am trying to manufacture a rotary die cutter i am not sure if anyone is familier with this application but anyone willing to help can google it and attached is a picture of the work piece

    My main problem is finishing the blade of the cutting edge of the work piece its 45degrees angle perpendicular from the z axis and the tip width is 0.04mm the problem is that i try to finish this blade using a 4axis machine with a ball nose tool and the end result is that i get inconsistent tip width varying from 0.0mm to 0.1mm while the part itself its 0.04mm.

    Any suggestions??
    Attached Thumbnails Attached Thumbnails Screenshot_20220308-220636_Samsung Internet.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 4axis rhinocam parallel finishing act weird
    By alextech in forum Rhinocam
    Replies: 5
    Last Post: 06-05-2017, 01:43 PM
  2. Feature-Cam to Master Cam
    By BGORDON in forum Uncategorised CAM Discussion
    Replies: 14
    Last Post: 08-22-2013, 02:27 PM
  3. New user with a Cam tech router and Master cam 7.1 and 9.1 need info Re: config
    By jrm7997 in forum Mastercam
    Replies: 7
    Last Post: 02-04-2011, 03:21 PM
  4. Master-Cam
    By johnsguns1 in forum Mastercam
    Replies: 5
    Last Post: 04-08-2008, 09:29 PM
  5. master cam x
    By frankg521 in forum Machines running Mach Software
    Replies: 1
    Last Post: 10-31-2007, 01:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules