PCNC440 Schematic Inaccurate
I had the schematic out for PCNC 440 troubleshooting a problem that appears to be with the stepper driver board. I noticed a couple inaccuracies in the schematic. First, the schematic calls for a 48 VDC power supply, but looking at the actual power supply markings, it shows 24 VDC. The schematic also has the enclosure cooling fan connected directly to the 48VDC power supply, but the fan has 3 wires, not 2 as shown on the schematic. I didn't take the covers off the wireways to trace the fan wires, but I think they might go to the spindle VFD. Does this make sense?
"You can't teach stuff in a school that you would learn in real life unless the real life people are in charge of the school." - Gene Sherman