Good day everyone,
I have lingered in the back ground for a few years now dreaming of the day I could own my own CNC Router. I finally got one. Bought a Bulkman 3D, I have it up and running with some help from a friend.
Today I was trying to hook up a touch plate, my two wires that go to the touch plate work , as the z is coming down I touch the two wires and it works with the script I installed. Great I thought.
The problem starts when I touch the router collet it sparks, then nothing happens. I have a XC E-cut 4 axis USB brake out board running Mach3. It’s running 24V. Has anyone had this problem before.
Note: Limit switch’s work, also when I touch the collet the limit switch lights up in the Mach 3 diagnosis. Otherwise machine works great. Any help will be appreciated.
Thanks.