Does anyone know how to back-up the parameters to go through every page and download or is there something that's allow you to do it all at once?
Does anyone know how to back-up the parameters to go through every page and download or is there something that's allow you to do it all at once?
Fanuc #????
User parameters?
Option parameters?
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Pretty much everything just in case something gets messed up..
Still need the Model#?
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
What type of machine, Mori's overlay has an easy way....check your operators manual if you have one.
Not only is there a way, but you really should do that before and after any changes!
I hate deburring.....
Lets go (insert favorite hobby here)
Oooops, 11M , Kitamura
System in EDIT mode
press SERVICE - PARAM - press PUNCH then ALL.
I am not sure if that outputs the 9000 options, I don't have my notes with me, you would have to check the parameter file and at least record these in hard copy.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Like a Charm...thanks again AL!!
I hate deburring.....
Lets go (insert favorite hobby here)
The pc parameters do not punch out.
Make a copy of the counters, keep relays, data tables, timers.
Or use a camera and take a photo of them.
is that the nc/pc parameters?
The 9000 option parameters are not password protected only PWE bit protected in P8000 = all ones
I am sure I downloaded them once before on the 10/11/15 etc.
I know you can upload them via a PC.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Press the nc/pc pushbutton.
This will take to the pmc page.
Select pmc prm
we have okuma & howa act-4 0TC Series Fanuc Controller. While switching on mahcine got system alarm 911 Ram Parity(HIGH). Further entering three alarms are shown as follows
1) 100 - p/s alarm
2) SERVO ALARM : X AXIS DGTL PARAM
3) SERVO ALARM : Z AXIS DGTL PARAM.
Dont have back up of this machine parameters. Please guide and support for running machine.