Hi,
I am pulling my hair out trying to get my machine operating.
An Anderson Selexx 3719 2008 machine was purchased second hand and had no CAD/CAM software on the machine.
I decided Enroute7 would be a good choice to use.
I have been trying for weeks to get the software to run on my machine.
Yesterday an Enroute technician tried to solve the issues with the post and managed to solve several issues, but is having problems getting the drill block code to produce correct Gcode.
Surely there are other Andi Selexx machines in the world running Enroute software.
I am in Australia and the time difference with the tech guys is proving impossible to get a timely solution.
I dropped back to an earlier version Enroute6, but this was worse. Several Gcode commands it produced were incompatible with my machine.

Anyone out there who can suggest what I do?

Gary