586,071 active members*
4,113 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas UMC1000 MRZP problem

Thread: Haas UMC1000 MRZP problem

Results 1 to 1 of 1
  1. 04-11-2022, 01:50 PM #1
    MrErikk
    MrErikk is offline
    Join Date
    Feb 2019
    Posts
    2

    Haas UMC1000 MRZP problem

    We have Haas UMC1000 about 6 months old. No carashes and geometry is perfet.

    When the tabel is B0 C0 everything is okei but when we rotate B90. it cuts pocket to wrong position 0,3mm along x axis.

    Setting 255, 256, 257 are correct otherwise other dimensions should be wrong.

    If i change setting 257 0,3mm so that the pocket location is correct, then the pocket depth is wrong 0,3mm. If i change it 0,15mm pocket loacation is wrong and depth is wrong by 0,15mm

    MRZP calibration did't help, WIPS calibration and MRZP calibration - have done this many times, no help.

    Used this toubleshoot to fix / get idea how to fix. : https://www.haascnc.com/service/trou...--ad05450.html
    Attached Thumbnails Attached Thumbnails MRZP-1.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Dial in Haas UMC 750 after MRZP
    By CNC-Chris91 in forum Haas Mills
    Replies: 0
    Last Post: 01-14-2021, 05:50 PM
  2. Y axis problem on Haas TM-1P
    By blaiseb in forum Haas Mills
    Replies: 13
    Last Post: 09-19-2019, 10:44 PM
  3. Haas problem
    By bobcad guy in forum BobCad-Cam
    Replies: 222
    Last Post: 07-20-2013, 09:06 PM
  4. HAAS TL-1 problem
    By rtuls35 in forum Haas Lathes
    Replies: 2
    Last Post: 03-18-2008, 02:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules